• Hyundai Wia LM1800TTS

    • 2 months ago
    • 1
    Hyundai Wia LM1800TTSY Image

    Hyundai Wia LM1800TTS

    Features

    • Large output built-In spindle motor
    • High productivity guaranteed by adoption of upper and lower turrets
    • Highly sturdy BMT turret adopted
    • Combined processing possible by the addition of Y axis to the upper turret (TTSY specifications)
    • Specific cutting time reduced due to synchronous rotation control of the opposite-type main spindle
    • High degree of sturdiness achieved by adopting all axis box guide (LM2500TT Series)
    • Design of the hybrid-type feed shaft combining box guide and roller guide (LM1600/1800TT Series)

    Specifications (metric)

    DescriptionUnitLM1800TTSLM1800TTMSLM1800TTSY
    Max Turning Diamm230230230
    Max Turning Lengthmm673673673
    Chuck SizeinchMain 8″
    Sub 8″
    Main 8″
    Sub 8″
    Main 8″
    Sub 8″
    Driving MethodBuilt inBuilt inBuilt in
    Spindle RPMr/min5,0005,0005,000
    Spindle OutputkW11/2211/2211/22
    Spindle TorqueN.m214/358214/358214/358
    Travel(X1/X2/Z1/Z2/ZB)mm165/195/700/720/668165/195/700/720/668
    Travel(X1/X2/Z1/Z2/ZB/Y)mm165/195/700/
    720/668/100
    Rapid Travel(X1/X2/Z1/Z2/ZB)m/min20/20/40/40/4020/20/40/40/40
    Rapid Travel(X1/X2/Z1/Z2/ZB/Y)m/min20/20/40/
    40/40/7.5
    Slide TypeLMLMLM
    No. of ToolsEA2 x 122 x 122 x 12
    Tool Sizemm20/3220/3220/32
    Milling Tool Speedr/min5,0005,000

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalog.


    Specifications

    DescriptionUnitLM1800TTSLM1800TTMSLM1800TTSY
    Max Turning Diain9″
    Max Turning Lengthin26.5″
    Chuck SizeinMain 8″
    Sub 8″
    Driving MethodBuilt in
    Spindle RPMr/min5,000
    Spindle Outputhp30/15
    Spindle Torqueft.lbs264/158
    Travel(X1/X2/Z1/Z2/ZB)in6.5/7.7/27.5/28.3/26.3
    Travel(X1/X2/Z1/Z2/ZB/Y)in6.5/7.7/27.5/28.3/26.3/3.9
    Rapid Travel(X1/X2/Z1/Z2/ZB)in/min787/787/1575/1575/1575
    Rapid Travel(X1/X2/Z1/Z2/ZB/Y)in/min787/787/1575/1575/1575/295
    Slide TypeLM
    No. of ToolsEA2 x 12
    Tool Sizein0.75″ /1.25″
    Milling Tool Speedr/min5,000

    Specifications are subject to change without notice for quality improvement.
    In case of any further information, please refer to the machine catalog.

    Join The Discussion

    Compare listings

    Compare