Kiwa KH-4500

  • 2 months ago
  • 1

Kiwa Japan Machine tools

Making full use of KIWA’s experience, KIWA has eliminated all possible wasted space on the KH-4500. As a result the KH-4500 incorporates one of the largest work envelopes in its class.

KIWA has also maintained its speed and agility with over 1G acceleration/deceleration on all axes. The rigidity has been greatly enhanced with the “stepped” base and column casting design. Keeping the traditions of KIWA design, the KH-4500 is fully expandable both for the APC and ATC portions of the machine. These features are field installable.

  • (4) Simultaneously Controlled Axes
  • Provision for Coolant through Spindle
  • Spindle Oil Cooler
  • Ballscrew Cooling
  • Y-axis Cooling System
  • Box Type Bed
  • Stepped Layout of X-axis Guide Ways
  • Roller Type Guide Way
  • Pallet and Chip Wash
  • Chip Conveyor – LNS-Turbo MH500
  • Spiral Augers
  • Tool life Management
  • AICC1
  • 1280 meter / 512 kB Memory
  • Helical Interpolation
  • Macro Programming
  • 19.7” x 19.7” (500mm) Pallets
  • 6 or 8 Pallet APC or Single Pallet
  • 20,000 rpm Spindle w/ Chiller
  • High Pressure Coolant Through Spindle ( 150Bar)
  • X, Y, and Z Scales Automatic Tool Length Measurement and Breakage Detection
  • 200 Bar Overhead Hydraulic Arm Including an Eight (8) Port Rotary Joint at the Center and 2 Four (4) Port Rotary Joints for Each Pallet (without hydraulic unit)

Join The Discussion

Compare listings